Effect of Electromagnetic Field on the Macrosegregation Behaviour of Al-Cu Alloy Ingot Prepared with Direct-Chill Casting Process

Abstract

A low frequency electromagnetic field was introduced into the direct chill (DC) casting process and the ingots of Al-Cu alloy were prepared to study the macrosegregation behaviour of the ingots under the influence of the electromagnetic field. The experimental results showed that there is an obvious positive segregation near to the surface and a negative segregation in the centre area of the ingot. Cu shows the highest segregation tendency among the main elements of Cu, Mg and Mn. Grain refiner element Ti shows a segregation trend opposite to that of Cu. With the application of electromagnetic field, the negative centreline segregation in the centre area of the ingot was evidently reduced although it didn’t show significant effect on the segregation near to the ingot surface. A significant grain refinement was also achieved with the application of electromagnetic field. The mechanism of the reduction of macrosegregation with electromagnetic field was also analyzed in the present work.