Effect of Electrochemical Pre-Oxidation for Mitigating Ultrafiltration Membrane Fouling Caused by Extracellular Organic Matter

Abstract

Algal extracellular organic matter (EOM) will cause grievous membrane fouling during the filtration of algae-laden water; hence, boron-doped diamond (BDD) anodizing was selected as the pretreatment process before the ultrafiltration, and the EOM fouling mitigation mechanism and the purification efficiency were systematically investigated. The results showed that BDD oxidation could significantly alleviate the decline of membrane flux and reduce membrane fouling, and the effect was more notable with an increase in oxidation time. Less than 10% flux loss happened when oxidation duration was 100 min. The dominant fouling model was gradually replaced by standard blocking. BDD anodizing preferentially oxidizes hydrophobic organic matter and significantly reduces the DOC concentration in EOM. The effluent DOC was reduced to less than 1 mg/L when 100 min of BDD anodizing was applied. After the pre-oxidation of BDD, the zeta potential and interfacial free energy, including the cohesive and adhesive free energy, were all constantly increasing, which implied that the pollutants would agglomerate and deposit, and the repulsion between foulants and the ultrafiltration membrane was augmented with the extensive oxidation time. This further confirms the control of BDD on membrane fouling. In addition, the BDD anodizing coupled ultrafiltration process also showed excellent performance in removing disinfection by-product precursors.