Abstract
Mixing of reagents in microfluidics is critical, and currently, the focus is on Newtonian fluids, but these reagents are often viscoelastic fluids. In this study, a micromixer containing a conductive cylinder is proposed based on the principle of induced charge electro-osmosis (ICEO). The Oldroyd-B constitutive model was chosen to characterize the flow properties of viscoelastic fluids, and the Poisson–Boltzmann model was used to describe the ion distribution in the electrolyte. The impact of the elasticity number (El) of viscoelastic fluids on the mixing efficiency, velocity, and vortex in the micromixer was studied. The results show that the mixing efficiency is only 55.41% when El = 0 (Newtonian fluid), and the mixing efficiency reaches 99.08% when El = 50. As El increases from 0 to 50, the cross-sectional average velocity at 50 μm from the micromixer exit decreases from 160 to 26.1 μm/s. Furthermore, the vortices around the conductive plate generated by the ICEO phenomenon begin to fluctuate at El = 7.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.