Year-end Sale % OFF 
Abstract
The effect of dynamic contact resistance (DCR) during MFDC spot welding of dual phase and martensitic steels was evaluated. A comparative analysis of DP590 to DP590 with DP780 to DP780 steel welds, and DP780 to DP780 with M1200 to M1200 steels welds was carried out. The DCR of DP780 steel is higher than DP590 steel during the initial stages of weld time, but is reversed later. The bulk resistance component, which is higher in DP780 steel, is dominant and generates more energy early in the process and controls melting. Although the total energy input is almost same, the higher β-peak and its early occurrence ensures better heat utilisation resulting in larger nugget size. Contrarily, in martensitic steel the interface resistance component remains high throughout the entire welding process and compensates for the lower bulk resistance effect. Even with relatively lower energy input the nuggets produced in M1200 steel are comparable to DP780 steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
