Abstract
Effect of doping elements on the etching characteristics of doped-ZnO (Ag, Li, and Al) thin films, etched with a positive photoresist (PR) mask, and an etch process window for infinite etch selectivity were investigated by varying the CH 4 flow ratio and self-bias voltage, V dc, in inductively coupled CH 4/H 2/Ar plasmas. Increased doping of ZnO films decreased the etch rates significantly presumably due to lower volatility of reaction by-products of doped Li, Ag, and Al in CH 4/H 2/Ar plasmas. The etch rate of AZO (Al-doped ZnO) was most significantly decreased as the doping concentration is increased from 4 to 10 wt%. It was found that process window for infinite etch selectivity of the doped ZnO to the PR is closely related to a balance between deposition and removal processes of a-C:H (amorphous hydrogenated carbon) layer on the doped-ZnO surface. Measurements of optical emission of the radical species in the plasma and surface binding states by optical emission spectroscopy (OES) and X-ray photoelectron spectroscopy (XPS), respectively, implied that the chemical reaction of CH radicals with Zn atoms in doped-ZnO play an important role in determining the doped-ZnO etch rate together with an ion-enhanced removal mechanism of a-C:H layer as well as Zn(CH x) y etch by-products.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
