Effect of dispersoid formation on age hardening and precipitation behavior of an Al-Si-Mg(-Cu) alloy with Mn and Cr addition

Abstract

In the present study, Mn and Cr elements were added to the alloy to induce the formation of the α-AlFeMnCrSi dispersoids during solution treatment. The effect of the dispersoids on subsequent age-hardening response and precipitation behavior was investigated. The results indicate that there is a partially coherent structure between the dispersoid and the α-Al matrix, but the coherence is weak. The precipitation of dispersoids resulted in accelerated age-hardening response and precipitation kinetics, but weakened peak-aged hardening effect. With the aging time increasing from 0 to 16 h, a new precipitation sequence was proposed in Mn+Cr modified Al-Si-Mg(-Cu) alloy: Supersaturated solid solution (SSSS) → GP zones (under-aged) → β'' + β' (peak-aged) → Si + β'' + β' + Mg2Si + Q + α (over-aged). Among them, the extra precipitates were heterogeneous nucleated on the dispersoids, which depended on the orientation relationship between the dispersoid and the precipitation, the interfacial energy of the dispersoid/matrix/precipitation, and the local solute element concentration. Heterogeneous precipitation of coarse particles on dispersoids resulted in the formation of precipitation-free zones (PFZ), which was mainly responsible for the weakened peak-age hardening effect. Moreover, compared to the base alloy, finer and denser precipitates were obtained in the matrix of the modified alloy, due to the increased density of dislocations induced by the dispersoids and the higher Mg supersaturation.