Effect of discrete heating on the key parameters and entropy generation in a corrugated enclosure filled with hybrid nanofluid

Abstract

This research work aims to study the effect of discrete heating on natural convective heat transfer, fluid flow, and entropy generation within a corrugated enclosure filled with water-based molybdenum disulfide (MoS2)–silicon dioxide (SiO2) hybrid nanofluid. In the study, various heights of the discrete heaters in terms of aspect ratios ( AR = 0.2 , 0.4 , 0.6 , 0.8 ) are considered for various Rayleigh numbers ( Ra = 10 3 − 10 6 ) with varying nanoparticle volume fractions ( ϕ = 0 % − 4 % ). Stream function-vorticity formulations of two-dimensional (2D) Navier-Stokes equations and energy equation are used as the governing equations, and a higher-order compact (HOC) finite difference scheme is employed to discretize those equations. The results obtained from the current developed code are first validated with the existing numerical and experimental data. Finally, the present computed results are studied, both qualitatively and quantitatively, in terms of streamlines, isotherms, entropy generations, average Nusselt numbers, and Bejan numbers. At Ra = 10 6 and the aspect ratio of heater length AR = 0.2 , a different and interesting flow and heat transfer phenomenon is observed. The results show that an increase in the aspect ratio of heater length from 0.2 to 0.8 decreases the average Nusselt number and total entropy generation by 57.49% and 13.76%, respectively, for Ra = 10 6 and ϕ = 4 % . In addition, the effect of nanoparticle concentration on total entropy generation increases up to 73.40% when the aspect ratio of heater length increases to 0.8.