Abstract
This paper will cover some processing routes along with grading and physical/chemical attributes of silica sand. The silica sand in this experiment was divided into four lots, and each of them was processed by the methods of calcining, scrubbing, mulling or rubbing respectively. The test results show that the sand grains which processed by different processing methods are irregular, the acid demand value of sand is lower than that of the base sand, and the grain size distribution of sand is similar to that of the base sand. However, the SiO2 content of processed sand is increased, the impurities content has a downward trend. Compared with the base sand, it can be found that the tensile strength value of molding sand prepared using the processed sands is higher and the bench life is almost no change.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
