Abstract
To investigate the effects of fuel NO formation models on the prediction of NO concentrations in a coal combustion field, numerical simulations for a coal combustion field in a 760 kW test furnace were performed. Three models, those proposed by De Soete, Chen et al. and Mitchell et al. were employed to calculate fuel NO formation originating from volatile matter. The results show that the model proposed by Mitchell et al. reproduces the tendency of the experimental data better than the other two models. In addition, the difference between the NO conversion ratios of bituminous coal and sub-bituminous coal that contains a high level of moisture was examined in detail using simulation results from the model of Mitchell et al. It was found that the formation of a region with a low oxygen mole fraction immediately downstream of a region with a high NO production rate is essential to realize a low NO conversion ratio.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.