Abstract
PurposeThis paper aims to study different morphology Cu6Sn5 effect on Babbitt alloy tribological properties.Design/methodology/approachDifferent morphology Cu6Sn5 of Babbitt was conducted by different cooling modes. Bare Babbitt was marked by Babbitt-0, Babbitt modified by first cooling mode (marked by Babbitt-1) and Babbitt modified by second cooling mode (marked by Babbitt-2). The microstructure and microhardness of specimens were tested. Then, tribological properties of Babbitt-0, Babbitt-1 and Babbitt-2 were performed by reciprocating mode under lubricated condition.FindingsThe results showed that shape Cu6Sn5 of Babbitt was changed from mixed needle and star-like shape to short rod-like or granular shape. The microhardness of Babbitt-1 was highest than that of Babbitt-0 and Babbitt-2. Compared with Babbitt-0 and Babbitt-2, tribological properties of Babbitt-1 were better under lubricated condition due to short rod-like and sparse distribution of Cu6Sn5. Moreover, the simulation result of strain and stress of Babbitt-1 was lowest than that of Babbitt-0 and Babbitt-2.Originality/valueDifferent morphology (shape and distributed) of Cu6Sn5 was obtained by different cooling modes. Modulated different forms of Cu6Sn5 around SnSb was beneficial to improve Babbitt alloy tribological properties.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
