Effect of Different Chemical Surface Treatments on the Shear Bond Strength of Acrylic Teeth With Different High-Impact Denture Base Resins.

Abstract

Introduction The debonding of acrylic teeth from the denture base, particularly in cases of prominent ridges, is a common problem faced by clinicians and patients. The present study was conducted to assess the effects of various chemical treatments on the shear bond strength (SBS) of acrylic teeth bonded to different high-impact denture base materials. Materials and methods The present in vitro study was conducted on 80 wax specimens with acrylic teeth bonded to two high-impact denture base materials (DPI Tuff (DPI Dental Products of India Ltd, Mumbai) and Trevalon HI (Trevalon HI, Dentsply, Karnataka)). The two main groups were further divided into four subgroups of 10 specimens each, depending on the chemical treatment at the ridge lap area of the tooth: control group without any chemical treatment, chemical surface treatment (CST) with dichloromethane and monomer mix, CST with ethyl acetate, and CST with acrylic adhesive cyanoacrylate. The SBS was tested using a universal testing machine (UTM). Analysis of variance (ANOVA) and post-hoc Tukey tests were used for statistical analyses. Results The mean SBS of Group A (DPI Tuff) was 111.75 Nas compared to 118 N in Group B (Trevalon HI). The differences were statistically significant (p<0.05). ANOVA and post-hoc Tukey's tests revealed significant differences between subgroups. The highest mean SBS was noted with a dichloromethane and monomer mix (1:1 volume), followed by the ethyl acetate, control, and cyanoacrylate subgroups. Conclusion The cross-linked acrylic teeth treated with a dichloromethane and monomer mixture (1:1 by volume), processed with Trevalon HI high-impact denture base resin had the highest SBS and thus were indicated for bonding teeth with the suggested denture base.