Abstract
The electrodeposition procedure was carried out utilizing a two-electrode system on fluorine-doped tin oxide (FTO) substrates, with the deposition voltage for CdS set at 1450 mV and for CdZrS at the range of 1450, 1550, and 1600 mV. The structural results show that both CdS and CdZrS thin films exhibit cubic structure. Surface image analysis shows that the FTO substrate was covered by film. The shape and grain size of the films is varied with deposition voltage. Elemental composition analysis confirmed the presence of desired elements Cd, Zr, and S on the deposited samples. CdS and CdZrS surfaces have an average surface roughness in the range of (3.2−19.6) nm. The optical properties of the films revealed a bandgap energy of 2.25 eV for CdS and (2.09−2.39) eV for CdZrS. The electrodeposited CdZrS thin films have potential applications as buffer layers in solar cell devices.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
