Effect of deposition temperature on thermal stabilities of copper–carbon films in barrier-less Cu metallization

Abstract

Copper-carbon alloy films have been applied in barrier-less Cu metallization as seed layers for improving the thermal stabilities. The effect of the deposition temperature on the microstructure and properties of C-doped Cu films on Si substrates was investigated. The films were prepared by ion beam-assisted deposition at various deposition temperatures by co-sputtering of Cu and graphite targets. No inter-diffusion between Cu and Si was observed in Cu(C) films throughout this experiment, because XRD patterns corresponding to their deep-level reaction product, namely, Cu3Si, were not observed in XRD patterns and EDS results of Cu(C) films. Amorphous carbon layer and SiC layer were found in the interface of Cu(C) as-deposited films when deposition temperature rose to 100°C by TEM, high-resolution image and Fourier transformation pattern. The Cu(C) films deposited at 100°C had the best thermal stabilities and the lowest electrical resistivity of 4.44μWcm after annealing at 400°C for 1h. Cu agglomeration was observed in Cu(C) alloy films with deposition temperatures of 200, 300 and 400°C, and the most serious agglomeration occurred in Cu(C) films deposited at 200°C. Undesired Cu agglomeration resulted in a sharp increase in the resistivity after annealing at 300°C for 1h. The deposition temperature of 100°C reflected the superior thermal stabilities of Cu(C) seed layers compared with those of other layers.