Effect of denture cleansers, surface finish, and temperature on Molloplast B resilient liner color, hardness, and texture

Abstract

The purpose of this study was to compare color, texture, and Shore A hardness of a resilient silicone denture liner with as-polymerized, roughened, or pumiced surfaces after treatment with perborate-, persulfate-, or hypochlorite-containing denture cleansers at 25 degrees or 55 degrees. Fifty-eight specimens that each exhibited an as-polymerized, a roughened, and a pumiced area were exposed to 5 different commercially available perborate-, persulfate-, or hypochlorite-containing denture cleansers at 25 degrees or 55 degrees continuously for 4 (1/2) months. The solutions were replaced twice a day. Control specimens were soaked in water with no cleanser. Before and after the 4 (1/2) -month cleaning regimen, the color, hardness, and texture of resilient liner surfaces were evaluated using a color densitometer, a Shore A durometer (Shore Instrument & Mfg Co, Freeport, NY), and a surface profilometer, respectively. Differences among groups after the cleanser treatment were determined using a repeated measures analysis of variance (alpha = 0.05) and a Tukey's Honestly Significant Difference post hoc test. Roughened specimen surfaces after 25 degrees or 55 degrees cleanser treatment exhibited significant color loss with some perborate-containing cleansers compared with the control. Roughened specimens treated at 55 degrees with perborate-containing cleansers also exhibited significantly greater color loss than those treated with the persulfate-containing cleanser. With roughened surfaces, significantly greater hardness was found with some perborate-containing cleanser compared with a hypochlorite-containing cleanser after treatment at 25 degrees. No differences were observed in surface texture based upon cleanser treatment. After silicone resilient denture liner treatment with certain perborate-containing denture cleansers, a greater amount of components could leach from the liner leading to a loss of color if the liner surface is rough.