Abstract

Under hot dry rock development, rock formations undergo the combined challenges of cyclic loading and high temperatures, stemming from various sources such as cyclic hydraulic fracturing and mechanical excavation. Therefore, a fundamental understanding of how rocks fracture under these demanding conditions is fundamental for cyclic hydraulic fracturing technology. To this end, a series of three-point bending tests were conducted on granite samples. These tests entailed exposing the samples to cyclic loading under varying real-time high-temperature environments, ranging from 25 °C to 400 °C. Furthermore, different upper load limits (75%, 80%, 85%, and 90% of the peak load) obtained in monotonic three-point bending tests were used to explore the behavior of granite under these conditions. The analysis encompassed the study of load–displacement curves, elastic stiffness, and mode I fracture toughness under cyclic loading conditions. In addition, the microscopic features of the fracture surface were examined using a scanning electron microscope (SEM). The findings revealed notable patterns in the behavior of granite. Cumulative vertical displacement in granite increased with the growing number of cycles, especially at 25 °C, 200 °C, and 300 °C. This displacement exhibited a unique trend, initially decreasing before subsequently rising as the cycle count increased. Additionally, the critical damage threshold of granite exhibited a gradual decline as the temperature rose. As the temperature ascended from 25 °C to 200 °C, the damage threshold typically ranged between 80% and 85% of the peak load. At 300 °C, this threshold declined to approximately 75–80% of the peak load, and at 400 °C, it fell below 75% of the peak load. Within the temperature ranging from 25 °C to 300 °C, we noted a significant increase in the incidence of cracks, crystal microfracture zones, and the dislodging of mineral particles within the granite as the number of cycles increased.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call