Effect of Cu, Ni, Ag addition on creeping properties of Sn5Sb-0.5Cu-0.1Ni-0.5Ag for high temperature packaging

Abstract

PurposeThis paper aims to investigate the effect of the Cu, Ni and Ag addition in Sn5Sb-based alloy on the mechanical properties and its mechanism.Design/methodology/approachThe micro-indentation, creeping test of the Cu/Sn5Sb–0.5Cu–0.1Ni–0.5Ag/Cu and Cu/Sn–5Sb/Cu were conducted, and its microstructure was analysed. The scanning electron microscope and the metallographic microscope characterized the microstructure of the Sn5Sb–0.5Cu–0.1Ni–0.5Ag/Cu and Sn–5Sb/Cu joints.FindingsThe microstructure of Cu/Sn5Sb–0.5Cu–0.1Ni–0.5Ag/Cu is distributed with the fine (Cu,Ni)6Sn5 and Ag3Sn intermetallic compounds (IMCs), whereas the Cu6Sn5 and Sn3Sb2 in Cu/Sn–5Sb/Cu is larger and far more less. This investigation reveals that the addition of the Cu, Ni and Ag elements reinforced mechanical properties and provided a technical basis for the development of Sn–Sb alloy with good mechanical properties.Originality/valueThis paper reveals that the hardness and the modulus of the bulk solder Cu/Sn–5Sb/Cu solder joints were improved with the addition of Cu, Ni and Ag trace elements. Meanwhile, the creep resistance and plasticity were also improved. This study has a great value for exploring high-performance Sn–Sb based solder alloy and has proved an example.