Abstract
A series of X%Cu/SAPO-34 (X = 1.0, 2.0, 4.0 and 6.0) catalysts were prepared by ultrasonic impregnation method for selective catalytic reduction (SCR) of NOx with ammonia. The effect of different Cu loadings on the selective catalytic reduction of NO by molecular sieve catalysts was examined on a fixed-bed reactor. Catalyst physicochemical properties were characterized and analyzed using XRD, TEM, NH3-TPD, H2-TPR, and in situ DRIFTS. Catalysts were used in reaction kinetics studies from the perspective of transient and steady-state kinetics. Cu/SAPO-34 catalyst with 4% Cu loading had the best denitrification efficiency and wide activity window. Copper species were highly dispersed on the catalyst surface. Cu/SAPO-34 catalyst with 4% Cu loading had rich acidic sites and excellent redox performance. Cu/SAPO-34 catalysts with 4% Cu loading possess minimal activation energy and were lower than commercial catalysts. According to the results of in situ IR, transient and steady-state analysis, the Cu/SAPO-34 catalyst with 4% Cu loading in the NH3-SCR reaction process was mainly E-R mechanism, and there was L-H mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.