Abstract
We study the effect of adding trimethylsilyl-treated polysilicate nanoparticles (Rg∼2.2nm) to crosslinked poly(dimethylsiloxane) (PDMS) elastomers above the entanglement molecular weight. The results are compared to un-crosslinked PDMS of a similar molecular weight, reported in previous studies and filled with the same polysilicate nanoparticles.Three techniques are used and compared to assess the enhancement or reduction in mobility with addition of filler: positron annihilation lifetime spectroscopy (PALS), rheology and nuclear magnetic resonance (NMR) spin–spin relaxation (T2) measurements. PALS measurements do not show any clear effect of the filler on the mobility of the chains, as assessed by the size of free volume holes, but reveal a net increase in free volume with temperature increase (from 30°C to 60°C). A reduction in the dynamic shear storage modulus (measured at 1rads−1) is observed in the filled network relative to the unfilled polymer (from 63kPa without filler to 44kPa with 40w/w% filler), attributed primarily to a partial inhibition of the chemical crosslinking reaction by the particles. The NMR relaxation measurements, instead, show a reinforcement of the polymer network with increasing addition of polysilicate particles, as revealed by the faster T2 decays at higher filler loadings, caused by increasing polymer bridging and particle flocculation. Similar trends are observed at higher temperatures (up to 80°C), with a higher overall mobility. The apparent disagreement between rheology and NMR stems from the fact that rheology reflects bulk mobility and is primarily sensitive to chemical crosslinks in the network, while NMR probes segmental dynamics, which are affected by the presence of particles.In un-crosslinked PDMS instead, both rheology and NMR show an initial increase in mobility at low filler content, followed by reinforcement with further particle addition. These results strongly suggest that entanglements and filler-induced packing disruption, rather than free volume, play a major role in polymer dynamics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.