Abstract

The goal of this research was to study the relationship between cracking and concrete permeability and to support accounting for permeability and cracking resistance to other factors besides strength, as criteria to be considered in mix design to achieve a durable concrete. The effect of material composition [normal-strength concrete (NSC) and high-strength concrete (HSC) with two different mix designs] and crack width (ranging from 50 to 400 μm) on water and chloride permeability were examined. Cracks of designed widths were induced in the concrete specimens using a feedback-controlled splitting tensile test. Chloride permeability of the cracked samples was evaluated using a rapid chloride permeability test and the water permeability of cracked concrete was then evaluated by a low-pressure water permeability test. Uncracked HSC was less water permeable than NSC, as expected, but cracking changed the material behavior in terms of permeability. Both NSC and HSC were affected by cracking, and the water perm...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.