Abstract
Low-carbon fuels such as bio-methane, obtained from biomass gasification consisting 96–98% of methane by volume, is a promising alternative fuel for internal-combustion engines. In the present work, methane is used as a surrogate of bio-methane for studying the engine characteristics. First, a comparative study was performed on a single-cylinder, water-cooled, variable compression ratio, spark-ignition engine operating under methane and gasoline fuels with compression ratio (CR) of 8.5:1. Subsequently, the effect of compression ratio was investigated on the performance, combustion including cycle-to-cycle combustion variations through statistical analysis, and emissions, when engine was operated over a wide load range at 8.5:1, 10:1 and 12:1 CRs under methane. It was found that the brake specific energy consumption and emissions were reduced for methane compared to gasoline at all operating loads. Results showed that when the CR was increased from 8.5:1 to 12:1 at low operating load of 5 N-m, brake specific fuel consumption was reduced by 7.2% and the average location of peak in-cylinder pressure (θpmax) was shifted towards the TDC, i.e. 17.4 to 13.5 CAD ATDC, with a decrease in cycle-to-cycle combustion variations. In addition, θpmax showed linear and quadratic relationships with peak in-cylinder pressure and IMEP, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
