Abstract
Blends covering the entire range of compositions of a metallocenic ethylen/1-octene copolymer and two conventional isotactic poly(propylene)s (iPPs) of different molecular weight have been prepared, analyzing (by differential scanning calorimetry and X-ray diffraction) the effect of composition and molecular weight on the crystallization behavior. It was found that those blends rich in the iPP component show a behavior practically coincident with the weighted addition of the two components. On the contrary, significant deviations were found for the blends where the ethylene copolymer is the major component. These deviations are considerably more important in the case of the blends with iPP of higher molecular weight. In such a case, the blend with a 25% by weight of iPP presents a normalized crystallinity degree of only 0.20, in comparison with the value of 0.57 exhibited by the pure iPP. After annealing at 120°C for 10 minutes, and cooling back to room temperature, that blend increases its crystallinity degree up to only 0.40.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.