Abstract
Highly ordered CoxPt1-x (x ≤ 0.82) magnetic nanowire arrays of 60 nm diameter have been fabricated successfully by electrodeposition process into the pores of anodic aluminum oxide (AAO) templates. Electrodeposition process has been used as it is one of the simplest and most inexpensive, easily controlled method for the synthesis of nanowires.It was found that deposition potential is a key factor to control the composition and thus the magnetic properties of the nanowires. The as-deposited CoxPt1-x nanowires were characterized by XRD to have fcc structure with preferred orientation of (111) or (001) along the nanowire. Co-rich nanowires exhibit ferromagnetic behavior in contrast to near superparamagnetic response of the Pt-rich nanowires. Upon annealing the effects of crystallization cause the decrease of anisotropy along the wire axis for Co82Pt18 nanowires due to the increase of magnetocrystalline anisotropy perpendicular to the wire axis. In the next phase of our work segmented CoPtP/Pt multilayers nanowires will be deposited within the AAO template. Such multilayers nanowires are expected to have the high anisotropy due to the formation of ordered Co-Pt alloy phase at the interface.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
