Abstract

Directionally solidified single crystal superalloy test bars were prepared by the spiral grain selection method. The microstructural evolution and orientation characteristics of the starter block and spiral part were studied, and the influence of the competitive growth of crystals on the microstructural characteristics was analyzed. The results show that the divergent grain groups, with small size and randomly oriented grains, appear at the bottom of the start block due to the chilling effect, which is an important area for competitive growth. As the height of the starter block increases, the primary dendrite spacing increases, and the grain density decreases; furthermore, the proportion of grains with an orientation deflection angle less than 10° gradually increases. The <001> texture gradually becomes stronger as the height of the starter block increases, which indicates that the competitive growth of crystals gradually weakens. At the initial stage of the crystal selection in the spiral part, the obstacle of adjacent grains and spiral passage is the main working mechanism. The grains located at the inner side of the front edge of the spiral passage have the growth advantage. The single crystal screening process is achieved at about two-thirds of the spiral height, and the single crystal with the orientation deviation angle of 6.7° from the casting axis is prepared.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.