Effect of combustor geometry on continuous spin detonation in syngas–air mixtures

Abstract

Regimes of continuous detonation burning of syngas–air mixtures in transverse (spinning) detonation waves in a flow-type annular cylindrical combustor are considered. Mixtures of carbon oxide and hydrogen in proportions of 1/1, 1/2, and 1/3 are used. The varied parameters are the combustor geometry and the fuel injection system, as well as the flow rates of air and syngas. The influence of additional supply of air to the products on the detonation wave parameters, pressure in the combustor, and specific impulse is determined. The range of realization of continuous spin detonation of the syngas–air mixture in terms of specific flow rates of the mixture is expanded from 25 to 786 kg/(s ·m2). It is shown that additional supply of air increases the pressure in the combustor, the thrust, and the number of detonation waves, but decreases the detonation wave velocity. The flow structure in the domain of detonation waves is studied. For some values of the combustor expansion coefficient, a chart of detonation regimes in the coordinates of the fuel-to-air equivalence ratio and specific flow rate of air is constructed, and the specific impulse of the thrust force is calculated.