Effect of CO2 flooding in an oil reservoir with strong bottom-water drive in the Tahe Oilfield, Tarim Basin, Northwest China

Abstract

The dissolution and diffusion of CO2 in oil and water and its displacement mechanism were investigated by laboratory experiment and numerical simulation for Block 9 in the Tahe oilfield, a sandstone oil reservoir with strong bottom-water drive in Tarim Basin, Northwest China. Such parameters were analyzed as solubility ratio of CO2 in oil, gas and water, interfacial tension, in-situ oil viscosity distribution, remaining oil saturation distribution, and oil compositions. The results show that CO2 flooding could control water coning and increase oil production. In the early stage of the injection process, CO2 expanded vertically due to gravity differentiation, and extended laterally under the action of strong bottom water in the intermediate and late stages. The CO2 got enriched and extended at the oil-water interface, forming a high interfacial tension zone, which inhibited the coning of bottom water to some extent. A miscible region with low interfacial tension formed at the gas injection front, which reduced the in-situ oil viscosity by about 50%. The numerical simulation results show that enhanced oil recovery (EOR) is estimated at 5.72% and the oil exchange ratio of CO2 is 0.17 t/t.