Abstract
Co is one of the interesting alloying elements in advanced high Cr ferritic steels used to improve their creep properties at elevated temperatures. However, it has been reported that Co bearing tends toward rapid deterioration in creep property at long-term testing. In this study, microstructures were studied in detail by comparing two kinds of 9% Cr ferritic steels with 3% Co and Co free for better understanding difference in those creep behaviors.Creep property of the steel with 3% Co was superior to that of the steel without Co within this study, as many researchers pointed out. Adding Co certainly suppressed δ-ferrite formation and there was large difference in prior-austenite grain size between two steels after tempering. In addition to this macroscopic difference, there was also remarkable change in precipitation behavior between them. It was found that heterogeneous precipitation of inter-metallic compounds and MX type carbonitrides was observed in Co free steel, while any extreme localization of such precipitation were not seen in 3% Co steel.It was deduced that such microstructural difference in connection with δ-ferrite formation between two steels was an important factor to understand better high temperature creep properties in 3% Co steel rather than those in Co free steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.