Abstract
Arm rear break is one component of vehicle spare parts found on motorcycles. This component is made using a forming process, where one of the parameters that affects the failure is the clearance value. Therefore, the purpose of this study was to determine the effect of clearance on the burr height of the 45P Arm Rear Break. The arm rear break is made of sheet metal plate material with a thickness of 2.6 mm through the forming process and variations in clearance numbers of 4%, 5% and 6%. For the punching process, a 12 mm diameter punch knife was used. The result of this research is that the highest bar value is produced by 6% clearance of 0.29 mm, then 5% clearance of 0.23 mm and 4% clearance of 0.17 mm. Keywords : Sheet metal, forming, arm rear brake, clearance, burr
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
