Abstract
Effect of Cr addition on damping capacity, mechanical property, and corrosion resistance of Fe-18%Mn martensitic alloy has been studied. Martensite start temperature (Ms) of the alloy decreases linearly from 150 to 25 with increasing Cr content up to 15%. The damping capacity decreases gradually from 27 to 23% in SDC with increasing Cr content from zero to 10%, and decreases rapidly with further Cr content. The tensile strength of the alloy maintains a level of 60 / regardless of Cr content with an elongation of 20 to 25%. Immersion test in 5% NaCl solution leads to the result that the corrosion resistance of the alloy becomes excellent above 10% Cr. From the above results, it is concluded that the optimum Cr content to improve the mechanical property and corrosion resistance of the alloy with a lesser decrease in damping capacity is about 10%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.