Abstract
A study was conducted to determine the effects of chilling method and postmortem aging time on broiler breast fillet quality. One hundred fifty eviscerated broiler carcasses were removed from a commercial processing line before chilling and transported to the laboratory. Half of the carcasses were chilled by dry air, whereas the other half were chilled by water immersion. Immersion-chilled (IC) carcasses were divided into 3 groups (0, 1.67, and 24 h) based on postchill fillet aging time on the carcass. Air-chilled (AC) carcasses were divided into 2 groups based on fillet aging time (0 and 24 h postchill). Because AC requires more time to reach the same temperature, fillets removed immediately after chilling (0 h) were the same postmortem age as the 1.67 h IC fillets. Average pH values of IC and AC fillets were similar when fillets were aged for the same length of time postmortem. Method of chilling had no effect on raw breast fillet color; however, postmortem aging time had a slight but significant effect on fillet lightness. Shear values of IC fillets removed 0 and 1.67 h after chilling were similar and corresponded to sensory panel categories of slightly tough to tough (>8 kg/g). Shear values of AC fillets deboned at 0 h (8.4 kg/g) were slightly lower but not significantly different than the shear values for IC fillets (10.3 kg/g) aged for the same length of time (1.67 h). After 24 h of aging, shear values for IC and AC fillets were <8 kg/g and corresponded to sensory panel categories of tender to very tender. Cook yield (%) of AC fillets was significantly higher than cook yield (%) of IC fillets for all deboning times. Results show that air chilling has an accelerating effect on rigor mortis onset, but postchill aging time is required to maximize the proportion of tender meat.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.