Abstract
To enhance the properties of poly(lactic acid) (PLA) composite films, unmodified (MWCNT) and modified multiwall carbon nanotubes (MWCNT-COOH, MWCNT-OH, and MA-g-MWCNT) were incorporated into the polymer matrix followed by the solvent casting method. The success of the modification of MWCNT with maleic anhydride (MA) was verified by absorption transmission reflectance spectroscopy (ATR). The fabricated nanocomposite films were analyzed by Fourier transform infrared (FT-IR) spectroscopy, thermal analyses, atomic force microscopy (AFM), contact angle measurements, dynamic mechanical analysis (DMA), and electrical conductivity tests. ATR spectra showed that MA was covalently grafted to the surface of the MWCNT, which was well dispersed and homogenously incorporated in the PLA matrix. The results of the thermal degradation demonstrated that the degradation value of the film increased from 328.91oC to 347oC with the addition of 0.5 wt% MA-g-MWCNT. Additionally, the MWCNT-OH/PLA films illustrated strongly hydrophilic nature due to the –OH groups. The surface resistance of 3 wt% of the MWCNT-COOH/PLA nanocomposite film decreased from 2.56x109 to 2.42x103 Ω (by 106 order). Therefore, the properties of PLA were increased with the addition of functionalized MWCNTs, which can be used for different applications such as biomedical, food packaging, and electronics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
