Abstract
This study was carried out in order to explore the behaviour of RC deep beams strengthening with CFRP strips. Eight simply supported deep beams were fabricated and tested under four-points loading scenario. Three different orientations for CFRP strips were used for strengthening the RC deep beams ; vertical, horizontal and inclined. All of the tested samples were of the same dimensions, concrete strength and steel reinforcement. A percentage increase in load carrying capacity of 48, 19 and 38% (with respect to the unstrengthened beam) was gained for beams strengthened with vertical, horizontal and inclined FRP strips, respectively. It was concluded that the strengthening with FRP strips of vertical fabric orientation is more efficient than strengthening with horizontal or inclined orientation since the vertical orientation gives the highest load carrying capacity, largest deflections at ultimate load and smallest crack width. On the other hand, applied the FRP strips in a horizontal orientation was insufficient for the strengthening purposes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.