Abstract
Nanocomposites were prepared using two bioresources, viz., cellulose nanofibers (CNFs) extracted from bamboo paper-pulp waste as the reinforcing phase and natural rubber (NR) as the matrix phase. CNFs with diameters up to 50 nm were isolated from bamboo pulp waste, and nanocomposites with 5 and 10% CNFs were obtained via two-roll mill mixing of solid natural rubber with a master batch containing 20 wt% CNFs. The NR phase was cross-linked using sulphur vulcanization. The morphology studies showed that the dispersion of CNF in NR matrix was not optimal, and some aggregates were visible on the fracture surface. The tensile strength and modulus at 50% elongation increased for the nanocomposites with the addition of CNFs, accompanied by a moderate decrease in elongation at break. The storage modulus of the natural rubber significantly increased above its glass-rubber transition temperature upon nanofiber addition. The addition of CNFs also had a synergistic impact on the thermal stability of natural rubber. The susceptibility to organic solvents decreased significantly for the nanocomposites compared to crosslinked NR, which indicated restriction of polymer chain mobility in the vicinity of the nanosized CNFs in the NR matrix.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
