Effect of cellulose fiber graft copolymerization with glycidyl methacrylate on the papermaking process retention and drainage aid performance

Abstract

Abstract Improving the retention and drainage aid performance of high speed papermaking processes is an important and challenging issue. In this study, fiber modification was used to improve the papermaking retention and drainage aid performance. The graft copolymerization of glycidyl methacrylate (GMA) with cellulose fibers was initiated using Fe2+-thiourea dioxide(TDO)-H2O2 in a mild aqueous medium; the synthesized polyglycidyl methacrylate grafted cellulose (CPGMA) was used to replace softwood bleached kraft pulp(SBKP) and hardwood bleached kraft pulp(HBKP), to study their retention and drainage aid behavior in the cationic polyacrylamide (CPAM)/colloidal SiO2/ anionic polyacrylamide (APAM) system. Graft copolymerization significantly enhanced the fiber hydrophobicity. Additionally, the papermaking process drainage aid performance and retention rate of the filler increased significantly with an increase in the CPGMA substitution rate. A small amount of CPGMA (0.5 %) significantly improved the dewatering ability and some improved the retention performance of the wet end of papermaking. SBKP-polyglycidyl methacrylate grafted cellulose (S-CPGMA) exhibited better retention and drainage aid performance than HBKP-polyglycidyl methacrylate grafted cellulose (H-CPGMA). Thus, introducing Fe2+-thiourea dioxide(TDO)-H2O2 initiated graft copolymerized S-CPGMA (in mild aqueous media) into pulp could improve the retention and drainage aid performance of the wet part of paper production.