Abstract
Abstract Synthesis and characterization of Nafion/TiO 2 membranes (TiO 2 1 wt%) with different solvents (DMF, DMAc, NMP) for proton exchange membrane operating at Microbial Fuel Cell (MFC) was investigated in this study. Nanocomposite membranes are studied due to their better physical properties and higher production voltage in comparison with Nafion 112 in MFC systems. Nafion/TiO 2 nanocomposite membranes were prepared by solution casting Method. The structures of membranes were investigated by Scanning Electron Microscopy (SEM). In addition, water uptake, proton conductivity, and ion exchange capacity (IEC) of membranes were measured and compared with Nafion 112 in microbial fuel cell. The nanocomposite membrane prepared with DMF solvent has the best morphology, the highest porosity, and the maximum proton conductivity. Subsequently, the membranes were tested in a real MFC system and the nanocomposite membrane prepared with DMF solvent exhibited the maximum MFC voltage.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.