Abstract
M3:2 high speed steels with and without carbon addition were prepared by using powder metallurgy at sintering temperature between 1210 and 1280 °C. Densification, microstructure and mechanical properties of M3:2 high speed steels were investigated. Experimental results show that with 0.4wt% carbon addition, full density high speed steels were obtained at temperatures in the range 1240-1260 °C which is 40 °C lower than that of the undoped counterparts, leading to a sintering window expanded by 10 to 20 °C. By the addition of 0.4wt% carbon, the sintered steels show attractive combinations of bend strength and hardness over those of M3:2 steels without carbon addition. The results reveal that the addition of carbon will not only lower the sintering temperature and oxygen content, but also improve the mechanical properties of the sintered steels.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
