Abstract
An investigation was conducted into the effect of carbide distribution on fracture toughness in the ductile–brittle transition temperature region of an SA 508 steel used for nuclear reactor pressure vessels. Tensile properties and elastic–plastic cleavage fracture toughness were measured in the transition temperature region, and the fracture toughness data were interpreted by using a simple fracture model containing carbide size distribution. This modeling study indicated that the critical nearest-neighbor distance between coarse carbides was an important microstructural factor affecting elastic–plastic fracture toughness, since it satisfied a linear relationship with the critical distance between a crack tip to a cleavage initiation site. These findings suggested that reducing the total number of carbides, particularly the number of M 3C carbides larger than the critical size, and homogeneously distributing fine M 2C carbides, were useful ways to improve fracture toughness in the transition temperature region.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.