Effect of Calcium Foliar Spray Technique on Mechanical Properties of Strawberries.

Abstract

The calcium fertilization of strawberry plants (Fragaria × ananassa Duchesne) was evaluated using two types of nozzles, with two liquid pressure levels and two driving speeds. The calcium content of the leaves and fruit were analyzed via flame photometry. Higher leaf calcium content was found in plots sprayed with standard nozzles, while higher fruit calcium content was observed for those sprayed with air induction nozzles. The fruit quality was assessed by determining the basic physical and mechanical properties, using uniaxial compression tests integrated with surface pressure measurements. Different spraying techniques influenced the mechanical resistance of the fruit. A spraying speed of 5 km/h and an operating pressure of 0.4 MPa significantly increased the firmness of the fruit by ~66%, the critical load level by 36%, and the maximum surface pressure by up to 38%, but did not increase the geometrical parameters of the strawberries. Regular foliar feeding during harvest could improve the mechanical strength of strawberries. An appropriate spraying technique with a calcium agent could effectively improve the mechanical properties of the delicate fruit, which is particularly important for limiting losses during harvesting, transportation, and storage.