Effect of butyl lactate methacrylate content on the properties of acrylic acid copolymers

Abstract

In the present work, the effect of butyl lactate methacrylate (BLM) content on the properties of acrylic acid (AA) copolymers was investigated. The BLM monomer was synthesized by reacting butyl lactate with methacrylic acid through azeotropic distillation method, which was confirmed by Mass spectrometric technique. Copolymers were synthesized by free-radical solution polymerization technique to obtain poly(BLM-co-AA). BLM monomer and copolymers were characterized by Fourier transform infrared (FTIR), 1H-nuclear magnetic resonance (1H-NMR) and proton decoupled 13C-NMR spectroscopic techniques. The Finemann-Ross method was used to determine the reactivity ratio of AA and BLM and the values were found to be 0.79 and 0.39, respectively. The wide angle X-ray scattering (WAXS) studies exhibited that the increase in BLM content in copolymers, shifted the amorphous halo from 21.34° to 15.39° and also increased the average molecular interchain spacing (〈R〉) from 5.20 to 7.18 A, which was calculated from 2θ values of amorphous halo of copolymers. Moisture absorption of polymers followed Fickian absorption. Depending upon the copolymer composition, relative humidity and time, the moisture absorption of copolymers can be tuned to a wide range from 11 to 35% (wt/wt). Glass transition temperature of copolymers decreased from 106 to 72.1°C with increase in BLM content. Copolymers were thermally stable up to 150°C and thereafter exhibited three-step thermal degradation in nitrogen atmosphere. Thermal stability of copolymers can be explained on the basis of 〈R〉 value.