Effect of blending way on β-crystallization tendency of compatibilized β-nucleated isotactic polypropylene/poly(ethylene terephthalate) blends

Abstract

The main purpose of this study is to investigate the β-crystallization tendency in the β-nucleated iPP blends. The β-nucleated iPP/compatibilizers blends, β-nucleated iPP/PET blends and its compatibilized versions with four kinds of compatibilizers (PP-g-MA, PP-g-GMA, POE-g-MA, and EVA-g-MA) were prepared by different blending ways. The effect of compatibilizers and blending ways on the non-isothermal crystallization and melting characteristics and the β-crystallization tendency of β-nucleated iPP blends were studied by differential scanning calorimetry. The relative content of the β-phase were characterised by the k β values determined on the basis of the wide angle X-ray diffractogram. The results indicated that the β-crystallization tendency of β-nucleated iPP blends depends on the kinds of compatibilizer. Addition of PP-g-MA significantly reduced the β-crystallization tendency of β-nucleated iPP, while PP-g-GMA, POE-g-MA, and EVA-g-MA have little effect on it. In the compatibilized β-nucleated iPP/PET blends, the blending ways, which controlled the dispersion of β-nucleating agent, influences the β-crystallization tendency intensively. The high β-crystallization tendency and β-crystal content were obtained for compatibilized β-nucleated iPP/PET blends prepared firstly at high temperature and β-nucleating agent added into blends at low temperature; however, the type of compatibilizers has little effect on β-crystallization tendency and melting behavior of blends.