Abstract
PurposeThe flow state of wet steam will affect the thermodynamic and aerodynamic characteristics of steam turbine. The purpose of this study is to effectively control the wetness losses caused by wet steam condensation, and hence a cascade of 600 MW steam turbine was taken as the research object.Design/methodology/approachThe influence of blade surface roughness on the condensation characteristics was analyzed, and the dehumidification mechanism and wetness control effect were obtained.FindingsWith the increase of blade surface roughness, the peak nucleation rate decreases gradually. According to the Mach number distribution on the blade surface, there is a sensitive region for the influence of roughness on the aerodynamic performance of cascade. The sensitive region of nucleation rate roughness should be between 50 and 150 µm.Originality/valueThe increase of blade surface roughness will increase the dynamic loss in cascade, but it can reduce the thermodynamic loss caused by condensation to a certain extent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Numerical Methods for Heat & Fluid Flow
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.