Abstract
It was reported in previous studies that the addition of Bi could improve the wettability and reduce the melting temperature of Sn-Ag solders. This work investigates the effect of Bi on the interfacial reaction between Sn-Ag-xBi solders and the Cu substrate reflowed at 250°C for different times and thermally aged at 150°C for different durations. Five types of Sn-Ag-based solders, Sn-3.7Ag-xBi (x = 0 wt.% to 4 wt.%), were used in this study. The microstructure of the interfacial Cu-Sn intermetallic compound (IMC) layers between the solders and the Cu substrate was studied, and the thickness of the Cu-Sn IMCs in different solder/Cu systems has been measured. It was found that the thickness of the Cu-Sn IMC layer decreased with increasing amount of Bi in both the reflow and thermally aged condition. The effect of Bi addition on the interfacial reaction between the solder and the Cu substrate was discussed based on the experimental results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
