Effect of ball milling time on microstructure and electrochemical properties of CeMg12+100%Ni hydrogen storage alloy

Abstract

In order to improve hydrogen storage performances of CeMg12 type alloys, ball milling technology was used for preparing nanocrystalline/amorphous CeMg12+100%Ni composite hydrogen storage alloys. The microstructures and morphologies of alloy samples were characterised by X-ray diffraction, scanning electron microscopy and high resolution transmission electron microscopy. The electrochemical hydrogen storage characteristics of as milled alloys were tested by an automatic galvanostatic system. The electrochemical impedance spectra were plotted by an electrochemical workstation (PARSTAT2273). The hydrogen diffusion coefficients D in the alloys were calculated by virtue of potential step method. The results show that the amount of nanocrystalline/amorphous Mg2Ni phase and Ni phase within alloy samples increase with prolonging milling time. Prolonging of ball milled duration markedly improves the electrochemical discharge properties and cyclic stability of alloy samples. The amorphisation degree of the milling alloys increases with rising milling duration. Furthermore, the high rate dischargeability, electrochemical impedance spectra and potential step measurement all indicate that electrochemical kinetics of alloy electrodes first increases and then decreases with increasing ball milling.