Effect of automatic cluster remover settings on milkability, milk quality and milking irregularities of crossbred cows.

Abstract

Automatic cluster remover (ACR) settings regulate the end of milking by detaching the clusters based on milk flow dropping below a preset level, which needs to be standardised for different breeds of dairy animals based on their production. A study was conducted to find out the best ACR setting for milking Indian crossbred cows based on milkability, milking irregularities and milk quality. Fifty six crossbred dairy cows in lactations 1 to 4 were categorised into three groups based on the level of production; low (N = 16; 18 kg/d). The ACR settings tested were 0.1, 0.2, 0.3 and 0.4 kg/min, keeping the vacuum level and pulsation settings constant. The ACR settings significantly (P < 0.01) affected the milk yield at all levels of production with a significant effect (P < 0.01) on machine-on time at 0.4 kg/min. The yield during the first 2 min of milking, average flow and peak flow rates were not affected at any level of production. The average electrical conductivity in milk was significantly (P < 0.01) lower for the low and medium yield cows without affecting the mean somatic cell count. At 0.4 kg/min, more cluster reattachments were needed because of significant amount of milk remaining in the udders post-cluster removal.