Abstract
The effects of austenite grain size on hardenability and impact toughness were investigated. The results show that: Since the beginning of the two-phase region with quenching temperature, the austenite grain size from the initial 4+6 mixed crystal at 740°C, and gradually increased to 10 at 860°C; Austenite grain size and hardenability was directly proportional to the austenite grain size increased from 8μm to 36μm, the biggest change is the hardness 10HRC; Austenite grain size and impact toughness is linear, with the decrease of grain size, the impact energy increases linearly, and the austenite grain size and impact toughness curve fitting. Comprehensive analysis for ensuring the hardenability of cold heading steels should be considered optimal matching of material strength and plasticity.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
