Effect of Aspect Ratio of Ferroelectric Nanofilms on Polarization Vortex Stability under Uniaxial Tension or Compression.

Abstract

Mastering the variations in the stability of a polarization vortex is fundamental for the development of ferroelectric devices based on polarization vortex domain structures. Some phase field simulations were conducted on PbTiO3 nanofilms with an initial polarization vortex under uniaxial tension or compression to investigate the conditions of vortex instability and the effects of aspect ratio of nanofilms and temperature on them. The instability of a polarization vortex is strongly dependent on aspect ratio and temperature. The critical compressive stress increases with decreasing aspect ratio under the action of compressive stress. However, the critical tensile stress first decreases and then increases with decreasing aspect ratio, then continues to decrease. There are two inflection points in the curve. In addition, an elevated temperature makes both the critical tensile and compressive stresses decline, and will also cause the aspect ratio corresponding to the inflection point to decrease. These are very important for the design of promising nano-ferroelectric devices based on polarization vortices to improve their performance while maintaining storage density.