Effect of ash-bridge deposition in asymmetric diesel particulate filter channels on the pressure drop and particulate matter trapping characteristics

Abstract

A diesel particulate filter (DPF) is commonly used to trap particulate matter (PM). The collapse and sintering of carbon and ash deposits during exhaust gas flow and DPF regeneration frequently result in the formation of ash bridges, which are buildups of ash and PM that clog the filter channels. To investigate the impact of an ash bridge formed by accumulated ash on the pressure drop and PM trapping characteristics of asymmetric DPFs, an asymmetric DPF channel with an ash bridge was constructed. The analysis employed computational fluid dynamics to examine how the ash bridge affects the pressure drop and PM trapping characteristics in an asymmetric DPF. This study reveals that the asymmetric DPF design effectively enhances the ash-holding capacity, thereby mitigating the risk of channel blockage. The presence of ash bridges in DPF channels has a more substantial impact on the pressure drop through radial congestion than through axial congestion. The application of asymmetric thin-wall DPFs can counteract the increase in exhaust backpressure caused by ash bridges. An ash bridge located in the middle of a DPF channel intensifies the uneven deposition of PM. However, implementing an asymmetric DPF structure enhances the uniformity of PM deposition.