Abstract

Recovering oil from thin oil rim reservoirs depends on some factors such as the gas-cap size, thickness of initial oil column, aquifer strength, permeability anisotropy (kV/kH), and rock and fluid properties. The arbitrary selection of these factors by researchers during investigation limits the systematic assessment of the influence of these factors on hydrocarbon recovery from thin oil rim reservoirs. This work investigated the effect of aquifer strength, gas cap size, and permeability anisotropy on hydrocarbon recovery, using design of experiment (DOE) as a tool in the systematic selection of some of the factors that influence hydrocarbon recovery. A static model of the base case oil rim was built in Petrel. Using Eclipse simulator, two other reservoir models having different gas cap sizes from the base case were built. Forty-eight simulation cases were generated using the result from the design of experiment (DOE). The aquifer model used is a Fetkovich analytical aquifer model, and the aquifer volume factors used for this investigation are 0.7, 1.0, 1.5 and 2.5, while the gas cap sizes (m-factor) used are 0.5, 1.0 and 2.0. The permeability anisotropy used are 0.01, 0.05, 0.10 and 0.40. Each simulation case was made to run for a period of twenty years (20years) and the results for the Field Oil Efficiency (FOE), Field Water Production Total (FWPT) and Field Gas Production Total (FGPT) were obtained and analyzed. It was found from this study that, the oil percentage recovery will increase as the gas cap size is decreased, while the percentage gas and water recoveries will increase as the size of the gas cap is increased for a thin oil rim reservoir. Again, for a thin oil rim reservoir with gas cap size of 0.50 ≤ m ≤ 2.00, percentage recovery of gas, oil and water will increase with aquifer volume. Also, based on the result obtained, a thin oil rim reservoir with small to moderate gas cap size (0.5≤ m≤1.0) will yield higher oil recoveries irrespective of the kV /kH ratio.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.