Abstract
Nanostructured FeAl/WC intermetallic composite coatings were prepared by cold spaying of the ball-milled powders. The effect of annealing on the coating structure and microhardness was examined. It was found that the nanocrystalline structure of the milled feedstock was retained in the cold sprayed coatings. The FeAl intermetallic phases were formed from the milled Fe(Al) solid solution during the post-spraying annealing at 550oC. The microhardness of the as-sprayed coating was about 680HV0.1 and it decreased a little with increasing the annealing time at 550oC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.