Abstract
Amorphous In2Te3 was prepared in both bulk form, by quenching the molten material, and thin-film form, by the thermal evaporation technique. X-ray diffraction analysis showed that the prepared samples in bulk and as-deposited thin-film forms were in the amorphous state. β- and α-phases of In2Te3 were prepared by annealing bulk samples at 615 and 813 K, respectively. Films annealed at 573 K give β-phase polycrystalline structure. The electrical conductivity for the as-deposited In2Te3 films increases with increasing film thickness. The conduction activation energy, ΔEσ, of the as-prepared bulk and thin film samples were found to be 0.516 and 0.521 eV. The corresponding values of room-temperature electrical conductivity, σRT, for these samples are 1.1×10-6 and 7.15×10-7Ω-1m-1, respectively. The observed change in the value of σRT may be due to the difference in the structure of bulk and thin-film samples. The increase of ΔEσ with annealing temperature for both bulk and thin-film samples is interpreted in terms of the density of states model proposed by Mott and Davis. © 1998 Chapman & Hall
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
