Abstract
Glass-coated FeCuNbVSiB microwires was annealed in the temperature range of 380 °C to 600 °C. The microstructures and magnetostatic properties of the glass-coated microwires were characterized by X–ray diffraction (XRD), Vibrating Sample Magnetometer (VSM) respectively. Relative complex permeability and complex permittivity was measured by transmission/reflection (T/R) coaxial line method in the frequency range of 2-18 GHz for as-casted and annealed Fe-rich microwires samples. The measured results show that the coercive field of the Fe-rich microwires decrease to 1.54 Oe at 470 °C, and then increase rapidly with the increasing of the annealing temperature. The coercive field and saturation field of the microwire samples increased abruptly with the outgrowth of the Fe-B hard magnetic phase in the Fe-rich microwire samples. The imaginary part of permeability and the natural ferromagnetic resonance frequency decrease for the thermal treatment below 470 °C, and then increase with the annealing temperature up to 530 °C. The change of magnetostatic and microwave electromagnetic properties of the microwires samples with the annealing process come from the change of the anisotropy caused by the internal stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.